- Pretreatment auxiliaries
- Dyeing assistant
- Spinning aid
- Finishing agent
- Special finishing process auxiliaries
- Other additives
- Add:BeiJingShiFengTai
- Tel:010-67966983
- Fax:010-65860158
- E-mail:cbjjf@bjcjf.com
- Contacts:Mr. Li
INTRODUCTION:
CJF-P220 general softening agent
Performance profile
CJF-P220 general softening agent for a low concentration of silicone microemulsion. It is suitable for all textile products which need soft finishing, and the products are in a prominent feeling.
This product is easy to disperse in water, stable performance, can be used alone, can also be used with smoothing agent.
Product technical index
External transparent liquid
Weakly positive to the child
Dilute release agent cold water
Usage and dosage
Immersion method: CJF-P220 4% ~ 8% or smooth agent blending with CJF-P212 4% ~ 8%
CJF-P206 2% ~ 3%
Bath ratio 1:20
Immersion time 20 to 30 minutes
Working fluid temperature 40
Dip method: 10 ~ 40g/L (the specific amount of the need to adjust according to customer requirements)
Use notes
1, should be in advance of the fabric rinse;
2, the working fluid with soft water.
3, this product is a small amount of water after adding the ingredients fully diluted tank;
4, should be regularly cleaned and finishing equipment;
5, do not be used with the same anion additives. If the pre - finishing with anionic additives, should strengthen water washing;
Packaging and storage
1 Pack: 200Kg, 50Kg plastic drum.
2 storage: sealed storage, room temperature storage for half a year.